Metrohm tiamo 1.1 Manual - Manual (Page 306)

278 Database
Command type
[ DET ], MET, SET, KFT, KFC, STAT, MEAS, MEAS T/Flow, DOS
Selection of the command type for which the curve properties are to be de-
fined. The curve properties defined per command type are saved per curve
window and per client.
Note
When the dialog window is opened the particular Command type that will be se-
lected as standard is that which applies for the curve shown in the curve win-
dow.
Autoscaling
[ on ], off
If this option is switched on then all axes in the curve window will be scaled
automatically.
Available columns
Shows all fields that can be shown as columns in the measuring point list.
Shown columns
Shows all fields that will be shown as columns in the measuring point list.
Adds the selected column to the measuring point list.
Removes the selected column from the measuring point list.
Alters the sequence of displayed columns by moving the selected column
up and down.