Metrohm tiamo 1.1 Manual - Manual (Page 302)

274 Database
Label
50 characters, [ auto ]
Freely definable axis labeling for the y1 axis. With auto the label from the
field Quantity will be used.
Scaling
Start value
1 E-8 ... [ 0.0 ] ... 1 E+8
Initial value for scaling the y1 axis.
End value
1 E-8 ... [ 1000.0 ] ... 1 E+8
Final value for scaling the y1 axis.
Curve
Curve color
Color selection, [ pink ]
Selection of the color for the curve line.
Symbol
Symbol selection, [ off ]
Selection of the symbol for showing the measured values. With off the
measuring points will not be shown.
Symbol color
Color selection, [ pink ]
Selection of the color for the measuring point symbol.
Smoothing
on, [ off ]
Switches curve smoothing on/off. The smoothed curve will be shown as
dotted line.
Smoothing factor x axis
[ 0.01] ... 1000
Factor for smoothing on the x axis.
Smoothing factor y axis
[ 0.01] ... 1000
Factor for smoothing on the y axis.
Show with original curve
on, [ off ]
If this option is enabled then the original curve (solid line) will be shown in
addition to the smoothed curve (dotted line, same color).