Metrohm tiamo 1.1 Manual User Manual
Page 178
150
Workplace
[ off ], Measured value, Time, Temperature, dMV/dt, Calculated 1...3, External
1...3
(for MEAS)
[ off ], Measured value, Time, Flow, Calculated 1...3, External 1...3
(for MEAS
T/Flow)
[ off ], Measured value, Volume, Temperature, Time, dV/dt, Calculated 1...3, Ex-
ternal 1...3
(for DOS)
Selection of the quantity to be shown on the y2-axis (right-hand y-axis).
Color
Color selection, [ magenta ]
Selection of the color for the curve of the quantity to be shown on the y2-
axis.
Show measuring points
on, [ off ]
If this option is enabled then in addition to the curve the individual measur-
ing points will be shown in the form of crosses.
Show grid
on, [ off ]
If this option is enabled then a grid will be shown.
Background
Color selection, [ white ]
Selection of the color for the curve background.