Metrohm tiamo 1.1 Manual - Manual (Page 149)

Subwindow Run 121
Device assignment
If at the Start test it is discovered that no device has been assigned for a device-
specific command then the window Device assignment appears for assigning the
device:
Command type
Shows the command type.
Command name
Shows the command name.
Device type
Shows the device type selected in the command.
Device name
Device name
Selection of a device from the device table. Only those devices being able
to execute the command are selectable.
Properties
The properties for the tab Single determination are set on the following 3 tabs:
• Display
Defines the columns to be shown on the tab Single determination .
• Process
Options for processing single determinations.
• Data import
Switches the import of external data on and off for the fields on the tab
Single determination .
Display
Defines the operating elements and columns to be shown on the tab Single deter-
mination .
Operating elements
[Hold] / [Cont]
[ on ], off
Switches the display of the operating buttons [Hold] and [Cont] on and off.