Metrohm tiamo 1.1 Manual - Manual (Page 737)

Subwindow Devices 709
Data storage under legal control
on, [ off ]
This option must be enabled if the balance has its own data memory (only
for Sartorius balances).
Remarks
1000 characters, [ empty ]
Remarks about the device.
This button is only shown with a balance or barcode reader. In order to de-
lete the device from the device list the device must be disconnected.
RS 232
COM Port
COM1, COM2, ..., [ first free COM port ]
Selection of the serial interface on the PC to which the device is connected.
Baud rate
300, 600, 1200, 2400, 4800, [ 9600 ], 19200
Transmission speed.
Data bit
7, [ 8 ]
Number of data bits.
Parity
[ None ], Odd, Even
Type of parity check.
Stop bit
[ 1 ], 2
Number of stop bits.
Handshake
[ None ], HW, SW
Type of data transmission protocol.
Timeout
1000 ... [ 2000 ] ... 9000 ms
Maximum waiting time for receiving characters. If this time is exceeded the
reception will be stopped.
Terminator for send
20 characters, \0D, \0D\0A, \0D\0A\0A, \0D\0D\0A ( \0D = CR, \0A = LF)
Final character for transmission in hexadecimal code.