John Deere 318 - Manual (Page 129)

2. Install cross in splined yoke with grease fitting toward
splined yoke (A).
3. Install bearing with soft metal rod and press or
soft-faced hammer. Push bearing down only until snap
ring groove is inside splined yoke.
4. Turn cross and bearing assembly over and install
other bearing.
5. Install four snap rings.
M43753
-UN
-12JAN90
MX,15905025,5 -19-20MAR95
Drive Shaft/Assemble
TM1590 (17MAY95)
50-25-5
316, 318 & 420 Lawn and Garden Tractors
020895
50
25
5