John Deere 318 - Manual (Page 435)

DFMX1 STEERING VALVE FIXTURE
Steering valve fixture is used to hold steering valve
during disassemby and assembly procedures.
Material required: One piece of 5 x 102 x 203 mm (3/16
x 4 x 8 in.) 1020 mild steel flat stock.
A—203 mm (8.0 in.)
B—9.5 mm (3/8 in.)*
C—51 mm (2.0 in.)
D—102 mm (4.0 in.)
E—51 mm (2.0 in.) Diameter Hole
*Four diameter holes equally spaced on a 83 mm (3-1/4 in.) diameter
circle.
M36877
-UN
-28APR89
DFMX2 ALIGNMENT SHIMS
Alignment shims are used to align steering valve
metering assembly with drive plates during assembly.
Material required: Six pieces of 13 x 38 mm (1/2 x 1-1/2
in.) long, 0.18 mm (0.007 in.) thick shim stock.
MX,159129900,1 -19-24FEB95
MX,159129900,2 -19-24FEB95
Group 00
Dealer Fabricated Tools
TM1590 (17MAY95)
299-00-1
316, 318 & 420 Lawn and Garden Tractors
020895
299
00
1