Inspect and replace spindle bushings – John Deere 318 User Manual

Page 221

Advertising
background image

10. Remove snap ring from top of right spindle.

11. Slide right spindle down out of axle to remove.

12. Inspect spindles for wear or damage. Replace if
necessary.

13. Inspect bushings for wear or damage. Replace if
necessary. (See procedure in this group.)

14. Installation is done in the reverse order of removal.

• On left-hand side; align marks made on steering arm
and spindle shaft.

• Apply multipurpose grease to lubrication fittings.

• Adjust toe-in. (See procedure in this group.)

M32072

-UN

-03AUG89

INSPECT AND REPLACE SPINDLE
BUSHINGS

1. Remove spindles. (See procedure in this group.)

2. Remove bushings (A) from axle using a long brass
drift and a plastic headed hammer.

3. Install new bushings using a plastic headed hammer.
Install bushings until they bottom against axle.

M36815

-UN

-25JAN90

MX,15908005,30 -19-07MAR95

MX,15908005,31 -19-15FEB95

Front Axle/Spindles

TM1590 (17MAY95)

80-05-11

316, 318 & 420 Lawn and Garden Tractors

020895

80

05

11

Advertising
This manual is related to the following products:

316, 420