Jeppesen Marine Workboat Navigator 1.3 - Manual (Page 104)

96
Jeppesen Workboat Navigator User’s Guide Jeppesen Workboat Navigator User’s Guide
96
Jeppesen Workboat Navigator User’s Guide
96
10
-
Data
Manager
Editing Nav Object Properties
Data Manager displays the Properties for any selected Nav Object. The properties
appear below the Nav Object list. Figure 10.3 shows Mark Properties. The
properties portion of Data Manager contains the following information.
Figure 10.3 - Nav Object Properties
Name. Name of the object.
Show Name. If this check box is selected, the object’s name appears on the chart.
Position. Lat/Lon of the Mark. Supported Lat/Lon formats are:
Degrees Minutes.M: <dd mm.mmm N/S ddd mm.mmm E/W>
Degrees Minutes Seconds.S <dd mm ss.ss N/S ddd mm ss.ss E/W>
Lock. A check-mark in this check box locks the object in place on the Chart. This
check-mark must be removed in order to move the object.
Show Nav Object. Removing the check-mark from this check box hides the object
from being displayed on the Chart window pane.
Icon. Use this drop-down list to select an icon to display on the Chart window pane
for the selected object.
Arrival Circle Radius. The radius of an arbitrary boundary around the object that
triggers an alert (when the Waypoint Arrival Alarm is activated) notifying of arrival.
XTE Alert. Enter the maxium number of units to travel off course before the cross
track error alarm starts.
•
•