Jeppesen Marine Workboat Navigator 1.3 - Manual (Page 25)

17
3
-
S
e
tti
n
g
U
p
3 - Setting Up Workboat Navigator
Setting Views With View Manager
The View Manager controls how the content of all Jeppesen Workboat Navigator
window panes is laid out. Up to six (6) layout templates or “Views” can be edited.
Use View Manager to determine what content displays in all window panes of a
View. For example, you may wish to have one View that displays a SysInfo window
pane, NavInfo window pane, and a Chart window pane, and another View that
displays only Radar. The View Manager helps you set up each configuration.
To Configure Views and Layouts
Click System Menu | Tools/Settings | View Manager.
Monitor Configuration: if there are two monitors connected to your computer,
select the right or left monitor to enable or disable that monitor, then click on a
monitor to set that monitor’s layout. See Figure 3.7.
Figure 3.7 - View Manager - Monitor Configuration - Two Monitors
One Landscape, One Portrait shown
Select and Configure Layout: There are six possible View configurations. The
upper left configuration is the default. Each established View is monitor-specific.
Figure 3.8 - View Manager - Select and Configure a Layout: Monitor #
Select a View configuration and click Edit to open the Select a Layout window
and edit the existing layout.
1.
2.
3.
4.