Jeppesen Marine Workboat Navigator 1.3 - Manual (Page 13)

2
-
Look
&
Feel
5
2 - Workboat Navigator Look and Feel
Glossary for this Chapter
Active
Window
Pane The Active Window Pane is the window pane that currently has cursor
focus. This is indicated by a yellow border around the window pane. In
Figure 2.1, the Active Window Pane is the Chart window pane.
Chart
Jeppesen Workboat Navigator displays high-resolution vector charts
and raster charts.
View
Layout of available window panes in Jeppesen Workboat Navigator,
created using the View Manager. A View can contain one full-screen
window pane, such as Radar, or several window panes, such as Chart,
NavInfo, and SysInfo.
Window
Pane
Each individual, available selection of content for the View. NavInfo,
Radar, Raster Charts, SysInfo, Vector Charts, and Video are each
available to be displayed in a Window Pane.
View
Manager
A component of Jeppesen Workboat Navigator used to establish up to
6 Views of charts and data. Users may wish to configure multiple Views
to allow them to utilize different components of the software.
Panel
NavInfo and SysInfo window panes are divided into multiple static
panels of content. For example, Target List and Target Details are two
of the available panels in the SysInfo window pane; COG and ROT are
two of the available panels in the NavInfo window pane.
Workboat Navigator Window Panes
There are five available types of Workboat Navigator Window Panes. All content
that is available through Jeppesen Workboat Navigator can be displayed using the
window pane layout conventions of the software. Each window pane is dedicated to
a particular type of data.
Specific system configurations (or “Views”) can be set up and customized using the
View Manager. View Manager controls how Workboat Navigator content appears
by allowing the users to arrange the different Workboat Navigator Window Panes.
See Chapter 3 - Setting Up Workboat Navigator for information on using the View
Manager.
Default View
Jeppesen Workboat Navigator by default uses a View containing Chart, NavInfo and
SysInfo window panes (see Figure 2.1). Certain events, such as pressing the MOB
button or a system alarm will cause Workboat Navigator to revert to the default
view. Use the
6 key or System Menu | Next View to toggle between views .
2