Jeppesen Marine Workboat Navigator 1.3 - Manual (Page 29)

21
4
-
T
h
e
S
y
s
te
m
M
e
n
u
4 - The System Menu
Use the System Menu to access a variety of system and on-screen functions, such
as the View Manager and Boat Properties. This menu is where you control larger
functions of Jeppesen Workboat Navigator. The System Menu collapses when not
in use.
Figure 4.1 - The System Menu
Boat Properties
The Boat Properties window is where you view and configure your boat. When
you open this window, the current or default settings appear. Displayed Static Boat
Settings cannot be edited from this window. See the Workboat Navigator Installer’s
Guide to edit Static Boat settings.
From the Boat Model group, click Edit Model to edit your boat configuration.
Standard Boat Properties include Boat Name/ID, Length, Width, Draft, Air Draft,
GPS Bow Offset and GPS Port Offset.
GPS Bow Offset is the distance from the bow of your boat to the location of the
GPS antenna.
GPS Port Offset is the distance from the port of your boat to the location of the
GPS antenna.
Boat Presentation Settings
Show Heading Line. Heading Line indicates the heading of the boat and originates
from the GPS transmitted position, extending 15 miles. The direction of the heading
line is based on input from the heading sensor. If no heading input is detected, the
Heading Line is based on the COG value. Default setting for this option is On.
Show Stern Flash Line. The Stern Flash Line is drawn 180 degrees from the
Heading Line, and also originates from GPS position, extending 15 miles. The
direction of the Stern Flash Line is based on input from the heading sensor. If no
heading input is detected, the Stern Flash Line is based on the COG value. Default
setting for this option is On.
•
•
4
4
-
T
h
e
S
y
s
te
m
M
e
n
u