Jeppesen Marine Workboat Navigator 1.3 User Manual
Page 26
18
Jeppesen Workboat Navigator User’s Guide
3
-
S
e
tt
in
g
U
p
From the Select a Layout window, choose a configuration template, consisting
of one to six panes in various layout configurations. Click on a configuration
template to open Edit the Layout.
Figure 3.9 - Select a Layout
Edit the Layout: This window is where you determine which type of data is
placed in each window pane. The active pane is surrounded by a yellow border.
Select the data type for each window pane by clicking on a chart or data type
in the right-hand list (Vector Chart, Radar, NavInfo, Raster Chart, Video, or
SysInfo). Once the data type has been determined for a window pane, focus will
automatically shift to the next window pane. If a data type is not available for a
particular window pane, it will not be available for selection.
Figure 3.10 - View Manager - Edit the Layout
After you have selected all content types, the Select and Configure Layout
window opens.
Repeat steps 3-7 for up to six views.
Click Done when you are finished with View configurations. To cycle through
each configuration use System Menu | Next View or the
6
hot key.
5.
5.
7.
8.
9.