Jeppesen Marine Workboat Navigator 1.3 - Manual (Page 61)

53 53
7
-
SysInfo
Pane
7 - SysInfo Window Pane
Targets Panel
The Target panel is used to track target information coming from your onboard AIS
device. There are six sub-panels containing available target information: All Targets,
River AIS, Target Detail, Messages, Voyage Data, and Static Data.
Target List
This is an overview list of all available targets, including boat Name/MMSI Number,
CPA and TCPA (HH:MM).
All Targets
Click this button to display all targets in the list.
Figure 7.3 - SysInfo Window Pane - Target List Panel
NOTE:
Targets that have an R before the CPA value also appear on the River
AIS panel.
Dangerous Targets
Place a check-mark in the Dangerous Targets check box to filter the Target List,
displaying only those targets that meet dangerous target criteria. Dangerous Target
criteria (based on CPA/TCPA thresholds) are set using System Menu | Tools/
Settings | Options | Targets | Target Threat Settings... Dangerous targets are listed
in the order of range from closest to furthest from your boat.
Filter
Place a check mark in the Filter check box to filter the Target list. The panel then displays
targets in order of their Distance to Passing (DTP) and Time to Passing (TTP) your boat,
provided both follow the recommended route.
Goto Target
This button centers the Chart window pane on the selected target. If the Chart window pane
is not open, the view will switch to the three panel default configuration.