Fluke Biomedical TNT 12000 User Manual
Users manual
Advertising
Table of contents
Document Outline
- TNT 12000 Users Manual
- 1. Introduction
- 2. Operation
- Introduction
- Safety Information
- How to Set Up the System
- How to Use the X-ray Detector (TNT 12000WD)
- How to Use the Dosimeter Detector (TNT 12000 DoseMate)
- Ion Chamber Selection and Setup
- Ion Chamber Connection and Placement
- How to Make a Dosimeter Measurement
- Ion Chamber Setup
- Dosimeter Measurements
- How to Add an Ion Chamber Definition or Cal Factor
- How to Edit an Ion Chamber Definition or Cal Factor
- How to Delete an Ion Chamber Definition or Cal Factor
- Measurement Mode Selection
- How to Set Units of Measurement
- Air Density Correction
- How to Adjust the Internal Temperature/Pressure Sensor
- Dosimeter Status
- How to Use the mAs Detector (TNT 12000 mAs)
- Setup Options
- 3. Microsoft Excel Add-In Software
- 4. Maintenance
- Appendices
- A. Model 96020C Ion Chamber
- B. Model 96035B Ion Chamber
- C. Model 500-100 CT Probe
- D. Model 500-200 CT Probe
- E. TNT 12000WD kVp, Exposure, and Exposure Time Measurement
- F. Warnings and Error Messages
- G. Troubleshooting
- H. PTB Information