Fluke Biomedical TNT 12000 - Manual (Page 73)

Operation
Setup Options
2
2-45
fct254.png
Figure 2-23. Setup Screen with mAs and DoseMater Detectors Connected
Use C and D to highlight a button and push E to move to a setup option.
Connection Option
Instructions for using the Connection ( ) setup are in the Communications
Settings section above.
How to Set Power Settings
To increase battery life, a display off time, low power time, system off time, and Display
brightness is user settable. You can read the charge level of the battery in each Detector
from the Power Setting screen as well.
To set a power parameter or see a Detector battery charge level:
Use C or D to highlight the Power button in the SETUP screen and push E to
open the POWER SETTING screen shown in Figure 2-24.
fct14.bmp
Figure 2-24. Power Setting Screen
When all the power settings are set, use A or B to highlight the Save button and push
E
to return to the SETUP screen.