Fluke Biomedical TNT 12000 - Manual (Page 19)

Introduction
Familiarization
1
1-7
Table 1-3. X-ray Detector Components
1
2
2
10
3
4
5
6
7
8
9
mAs Option
Installed
fct01.eps
Item Name Description
A Exposure Surface The surface to be exposed to x-ray radiation
B Threaded Insert Secures the detector to a test stand, such as a
camera tripod
C Holster Protective cover for the display
D AC adapter connector Connects the ac adapter
E USB Connector To connect the detector or a Computer via USB
cable
F Communication status LED Indicates the communication status (see the
Display to Detector Communications section in
Chapter 1)
G Battery-status Indicator Tri color LED indicating the battery status of the
display. Refer to the Battery Charging section
for more details.
H On/Off Switch Powers the Detector On/Off
I Reset switch Resets the Detector
J mAs input jack (when mAs option is
installed) Male coaxial BNC jack for connection to the
mA/mAs interface cable
WCaution
To avoid damage to the Detector,
never connect to generator mA/mAs
taps without the TNT 12000 mAs
shunt.