Symbols, Rf certification – Fluke Biomedical TNT 12000 User Manual
Page 16
TNT 12000
Users Manual
1-4
To ensure safe operation of the Test System, fully observe all instructions and warnings
contained in this manual.
XW Warning
To avoid possible electrical shock or personal injury, follow
these guidelines:
•
Use the TNT 12000 only in the manner specified by the
manufacturer.
•
Do not use the product if it operates abnormally.
•
Use only the ac adapter provided with the system.
•
Ensure that the external power source is properly rated for the
system.
W Caution
To avoid damage to the TNT 12000 or adverse affects on its
performance, follow these guidelines:
•
Allow only qualified technical personnel to service the
system.
•
Do not expose the system to temperature extremes.
Ambient temperatures should remain between 0 °C and
35 °C. System performance may be adversely affected if
temperatures fluctuate above or below this range.
•
Clean the TNT 12000 by gently wiping down with a clean,
lint-free cloth dampened with a mild detergent solution. Do
not immerse the unit in liquid.
Symbols
Table 1-1 describes the symbols associated with the TNT 12000.
Table 1-1. Symbols
Symbol Description Symbol Description
X
Hazardous voltage
P
Conforms to European Union directives
W
Important information, refer to manual
;
Conforms to relevant Australian EMC
requirements
•
Complies with RoHS directives
Ž
Complies with Part 15 of the FCC rules
~
Do not dispose of this product as
unsorted municipal waste. Go to
Fluke’s website for recycling
information.
´
This product contains a Lithium-ion
battery. Do not mix with solid waste
stream. Spent batteries should be
disposed of by a qualified recycler or
hazardous materials handler per local
regulations. Contact your authorized Fluke
Service Center for recycling information.
RF Certification
The TNT 12000 contains radio transceivers that are used for wireless communication
between the Display and the Detectors. The transceivers operate in the 2.4 GHz
frequency band with a maximum transmitting power of 1 mW. The transceivers have
been tested and certified for use in various areas worldwide.