GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 28)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 25 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Creating the Graphic User Interface (GUI) Screen
The Map Area screen is used to design the operator screen display on the system’s MapGUI control
computers. The Map Area screen is accessed from the Home screen by clicking the Map button on the
right side of the screen. The example shown below is a blank Area Map screen.
The Map
A map is generally a drawing or picture showing the facility layout but it can be any graphical
representation of the system. There can be multiple maps if a facility is too large to be clearly shown on a
single map.