GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 35)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 32 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Adding and Deleting Alarm Control Buttons
From the Map Area screen, click on the Alarm Control button to access the screen below. This screen is
used to define the alarm activation buttons on the MapGUI screen.
Initially eight alarm buttons are displayed on the left side of the screen and are labeled “Unassigned.” If
more than eight alarm buttons are needed, click the Add button. Each time the Add button is selected, an
additional page of eight alarm buttons are added. The arrow buttons at the bottom of the alarm list are
used to navigate between multiple pages of alarm buttons. The current page number and total number of
pages are shown between the navigation arrows.
To delete a page of alarm buttons, navigate to the desired page, then click the Delete button.