GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 66)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 63 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Initialization Failed Screen
As the window states, there are three possible courses of action you can take, and all are briefly described
in the error window.
Retry - Pressing this button will attempt
the initialization sequence again using the
IP addresses found in the ipConfig.xml
document, which can be found in the
MapGUI.exe directory.
Manual IP Entry - Pressing this button
will cause the Manual IP Configuration
screen to be shown. It is explained in
further detail in the next section below.
Quit - Closes the application.
Figure 2. Initialization Failed
Manual IP Configuration
This screen allows for the user to manually enter in the IP address of the server and re-attempt the
connection to the server.
Figure 3. Manual IP Configuration
This screen is typically used the first time
the system is started up, or if the
ipConfig.xml has been inadvertently moved
or deleted.
Once the IP address is entered, press the
Connect button to re-attempt the
connection.