Setting up the com port – GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual User Manual
Page 58
Advertising
Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual
Page: 55 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Select the .mio configuration file using the file browsing window as shown:
Setting up the Com Port
The server communicates to the system RTU devices using a serial data connection. The server PC com
port number must be configured. Select Settings Æ Comport from the toolbar as shown below.
Advertising