The faults tab – GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual User Manual
Page 99
Advertising
Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual
Page: 96 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
The Faults Tab
The Faults tab will display all faults being monitored in the system along with detailed information as
described below. The Status Monitor updates in real-time, so if you are viewing it and the display clears
or the event counters on the other tabs change, it is because the status of the system has changed.
Figure 30.Status Monitor Faults Tab
Notation Name
Description
Fault Source
The location of the fault
Source Input
Which input is faulted.
Fault Type
The type of fault
Fault Description
A more specific description of the fault.
Advertising