GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 55)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 52 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Determining the AMI Message Numbers
When all messages have been configured, the message numbers must be obtained so they can be entered
onto the Alarm Event screen in the Sonic Console Program. This is a critical step in the overall system
programming to assure the correct message is played during an alarm event.
To obtain a list of message numbers, perform the following steps:
1. Highlight the appropriate configuration file from the list.
2. Select the Configuration tab and select Print Parameters as shown above. The following screen will
appear.
3. Check “Message Quick Reference Sheet,” and then select Preview.