GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 54)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 51 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Settings
Click on the Settings icon to access the form shown below. There are seven sub-forms that are accessed
from the tab selections on this screen, but only the Global form must be changed. Refer to the ACT help
menus for more information on each sub-form and its intended use.
Global Form
The only entry needed on the Global form is the ADVANCE Control checkbox. This must be checked to
allow the Sonic system’s RTU to control the play functions of the AMI.