GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 48)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 45 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Fragments
The template contains fragments to produce a standard library of alarm tones. Clicking on the Fragments
form displays the fragment list as shown below.
Each default fragment is a recorded alarm tone. The fragment name indicates the type of tone. To listen
to any fragment, right click on it and select “play” from the pop-up list. The .mp3 sound file will be
played on the PC speakers (if present).
If tones or prerecorded messages are needed for the Sonic system that are not contained in the standard
library, they must first be recorded as an .mp3 file and stored in the folder C:\Program Files\AMI
Configuration Tool\MP3 Fragments. The fragments can then be added to the fragment list.
Adding New Fragments – To add a fragment right click anywhere in the fragment list and select “add
new” from the pop-up list. You will be prompted to provide the path name of where the .mp3 file is
stored on the computer. When selected, the file will be added to the fragment list.
Deleting a Fragment – To delete a fragment, right click on the fragment and select Delete from the
pop-up list. You will be prompted to verify the deletion. When deleted, the file is removed from the
fragment list.
N OTE : Any fragments that are being used by a message cannot be deleted. The ACT software will
prompt the user if this occurs.