GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 60)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 57 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Server Status
The server has several status screens available for diagnostic purposes during system commissioning or
troubleshooting. The status screens are accessed from the tool bar Status selection as shown below.
RTU Status
The real-time operating condition of each RTU can be viewed from the RTU Status screen shown below.
To access the screen, Select Status Æ RTU from the toolbar.
RTU is a description of the RTU (as entered during the system configuration process).
Status indicates the data communication between the server and the I/O control module inside the RTU
assembly. (Active or Faulted)
AMI Status indicates the data communication between the I/O control module inside the RTU assembly
and the AMI connected to the RTU. (Healthy or Faulted)
Version - Firmware version of the I/O control module inside the RTU assembly.