GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 33)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 30 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Assigning Properties to an Area on the Map
Properties must be assigned to each area drawn on the map. To do this, RIGHT click anywhere in the
highlighted area and select “Properties” from the menu; or select the area by LEFT clicking then selecting
the Zone Properties icon on the tool bar. The screen below will appear.
Description – Enter a description of the area in the text box. This description will appear on the MapGUI
operator screen when the area is selected.
Destination – Use the pull-down list to assign this area to one of the pre-defined destinations. When
selected by the MapGUI operator, the RTU(s) contained in the assigned destination will be activated for
either alarms or pages.
Color – Use the pull-down list to select the color of the area to be displayed on the map.