The alarms tab – GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual User Manual
Page 97
Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual
Page: 94 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
The Alarms Tab
The Alarm tab will display all currently active alarm events in your system along with detailed
information as described below. The Status Monitor updates in real-time, so if you are viewing it and the
display clears or the event counters on the other tabs change, it is because the status of the system has
changed.
Figure 28. Status Monitor Alarms Tab
Notation Name
Description
Source Location
Where the alarm was initiated.
Source Input
What type of input was used to initiate the alarm.
Alarm Description
The Alarm Description
Alarm Destinations
Lists all destinations currently receiving the alarm.
Status
Tells whether the alarm message broadcasting or not
AMI Status
The current state of the Audio Messenger Interface.