GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 57)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 54 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Sonic Server
The Sonic Server program runs on the system control computer. There can only be one instance of the
Sonic Server running in a system. Where redundancy is needed, the Sonic Server program can be started
on a backup control computer if a problem occurs on the primary control computer.
Starting the Sonic Server Program
Start the program by running the Sonic Server.exe file installed in C:\Programs\Sonic folder.
The icon shown below will appear on the task bar when the Sonic Server is running.
Loading the Configuration File
Load the system configuration file (.mio file) in the Sonic Server by clicking on the Server icon in the tool
bar as shown above. The Sonic Server screen will open. Select FileÆ Load File from the toolbar as
shown below.
Sonic Server Icon