GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual - Manual (Page 39)

Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual Page: 36 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
In the example above, each of the sub group buttons are associated with the “Fire” Alarm Control button
on the left side of the screen. When the Fire button is selected on the operator’s screen, the Sub Group
buttons will appear. The operator then selects the exact fire alarm message using the Sub Group buttons.
Each Sub Group button must be labeled and assigned to an alarm event. Buttons with Type selected as
“None” are inactive and will not be displayed on the MapGUI operator screen.
If more than 21 Sub Group buttons are needed, click the Add button. Each time the Add button is
selected, an additional page of 21 Sub Group buttons are added. The arrow buttons at the bottom of the
button list are used to navigate between multiple pages of Sub Group buttons. The current page number
and total number of pages are shown between the navigation arrows.
To delete a page of Sub Group buttons, navigate to the desired page, then click the Delete button.