Initiating an alarm from the map view – GAI-Tronics Sonic Alarm Sonic Alarm System Software Programming and User Manual User Manual
Page 87
Advertising
Pub. 42004-410A
Sonic Alarm™ System Programming and User Manual
Page: 84 of 98
f:\standard ioms - current release\42004 instr. manuals\42004-410a.doc
03/09
Initiating an Alarm from the Map View
The figure below illustrates the process of initiating an alarm from the Map view.
Figure 21. Initiating Alarms from The Map View
The most important thing to remember when initiating non-preset alarms is that both a valid alarm, and
valid destination must be selected, or you will be prompted to make your selections again.
Advertising