How to access the starfire service – NavCom SF-3050 Rev.I User Manual
Page 151
SF-3050 GNSS Product User Guide
– Rev I
C-132
How to Access the StarFire Service
StarFire is a subscription service. The user pays a subscription, which licenses the use of
the service for a predetermined period of time. In addition to the StarFire license, the SF-
3050 receiver requires a StarFire Software Option
1
. This is not a requirement for other
NavCom receivers.
StarFire subscriptions can be purchased for quarterly, biannual, or annual periods and
are available via a NavCom authorized representative, or by contacting
An authorized subscription will provide an encrypted keyword, which is specific to the
Serial Number of the NavCom receiver to be authorized. This is entered into the receiver
using the provided controller solution.
For the SF-3050 receiver only, the initial StarFire license and StarFire Software Option
are installed by an authorized dealer or the user.
Former NavCom receivers were delivered with the initial StarFire license preinstalled at
the factory, and subsequent licenses were installed by the user. NavCom’s order
fulfillment center has changed, necessitating a change in initial license installation as
detailed above.
For the SF-3050 receiver only, subsequent renewals of the license can be transmitted to
the receiver via satellite.
The only piece of equipment needed to use the StarFire system is a StarFire receiver.
NavCom offers a variety of receivers configured for different applications. Details of all the
StarFire receivers are available from the NavCom authorized local representative or the
NavCom website at:
StarFire receivers include a multi-frequency GNSS receiver and an L-Band receiver
integrated into a single unit to provide the exceptional precise positioning capability of the
StarFire Network, anywhere, anytime.
1
Dependent on Bundle Options: Standard or Optional