NavCom SF-3050 Rev.I - Manual (Page 51)

SF-3050 GNSS Product User Guide – Rev I
32
Bluetooth
The SF-3050 GNSS receiver is Bluetooth capable in all software bundle configurations.
The Bluetooth module permits cable-less operation between the sensor and a Bluetooth
equipped controller. Wireless connectivity is provided within a range of 10 m (32 ft), and a
data rate of 230.4Kbps is supported, 10 Hz maximum. The Bluetooth module contains
Bluetooth certified components and is FCC and CE certified. Communications
performance is dependent on the user Bluetooth device used.
Refer to Chapter 3 for setup instructions via the supplied NavCom software utility, StarUtil
3000 or via the Input Terminal using the [BTSET] command.
Ethernet Connection
An Ethernet connection may be set up for the SF-3050 receiver. Refer to Chapter 2 of the
StarUtil 3000 User Guide and to the Sapphire Technical Reference Manual
[ETHCONFIG] and [ETHVCOM] commands for detailed instructions on configuring and
establishing an Ethernet connection.