NavCom SF-3050 Rev.I - Manual (Page 45)

SF-3050 GNSS Product User Guide – Rev I
26
spite of adverse signal tracking conditions by incorporating the use of GPS (L1, L2,
L2C, L5), GLONASS (G1, G2), and SBAS (WAAS, EGNOS, MSAS, GAGAN) signals
(standard for most software bundles).
 66 Signal Channels: Provides the ability to track multiple frequencies of satellites in
several constellations simultaneously. This allows for extended navigation in otherwise
adverse conditions for a single constellation. An additional channel is dedicated to
tracking StarFire signals.
The system includes a Rover, Base, or Airborne antenna, and interconnection
accessories outlined in Table 13.
Performance Upgrade Path
The SF-3050 is designed with a robust and long-term performance upgrade path to meet
changing needs via software upgrades. The following tables outline the standard and
optional features of each SF-3050 software bundle.
Table 1: Performance Upgrade Path
– Position & Data Rates
Rate
SF-3050 Bundles
A
1
G S M
Position, Velocity, and Time
1,5*Hz Std Std Std Std
10Hz Opt Opt Opt Std
25*Hz Opt Opt Opt Std
50, 100Hz Opt Opt Opt Opt
Raw Data
1, 5*Hz Std Std Std Std
10Hz Opt Opt Opt Std
25*Hz Opt Opt Opt Std
50, 100Hz Opt Opt Opt Opt

1
Bundle A is not available in software prior to v. 2.0.22.0.

*5Hz is the default PVT and Raw Data Rate for software bundles G and S.
25Hz is the default PVT and Raw Data Rate for bundle M.