NavCom SF-3050 Rev.I - Manual (Page 74)

SF-3050 GNSS Product User Guide – Rev I
55
 NTRIP Config
Figure 61: NTRIP Config Screen
This screen configures the information that the NTRIP client or server needs to connect to
an NTRIP caster. If no configuration information is specified, the current settings will be
displayed.
 Caster Preset: Enables StarFire Settings.
 Caster: Specifies name of the NTRIP caster to connect to.
 Port: Specifies caster port number to connect to
 Mount Point: Specifies the name of the mount point to connect to.
 User Name: Required for authentication
 Password: Required for authentication
 Send NMEA GGA: Indicates whether transmission of NMEA GGA message is
required.
 Auto Connect: Indicates whether or not NTRIP should try to connect automatically to a
client or a server.
 Correction Port: Indicates name of local port to use for NTRIP connection.
 Authentication: Indicates whether to use BASIC or DIGEST authentication.
 NTRIP CLIENT: Connects/disconnects to NTRIP client mount point.