Upload starfire license, Figure 29: progress dialog box, Figure 30: position, velocity, time menu item – NavCom SF-3050 Rev.I User Manual
Page 36
SF-3050 GNSS Product User Guide
– Rev I
17
64. Click
. An upload progress window opens (see Figure 29).
Figure 29: Progress Dialog Box
65. At the end of the upload, a confirmation box opens. Click OK.
66. Repeat steps 39 through 48 to upload another firmware file, if necessary.
67. Do not close StarUtil 3000. Continue to the next section.
Upload StarFire License
For the initial configuration, the StarFire license must be installed via data
cable. Subsequent renewals of the license are typically transmitted to the
receiver via radio broadcast. Refer to Over the Air StarFire Licensing for
details.
The receiver must be tracking GPS satellites and providing a valid position
solution at the time of the StarFire license upload to accept the license.
68. To confirm a valid position solution on the PVT tab/Navigation Status window, first
click Position, Velocity, Time (see Figure 30) on the Detailed Views menu to open the
PVT tab (see Figure 31 ).
Figure 30: Position, Velocity, Time Menu Item