NavCom SF-3050 Rev.I - Manual (Page 24)

SF-3050 GNSS Product User Guide – Rev I
5
COM Port Settings USB Settings
Figure 4: Port Configuration
17. Set the appropriate options according to the Connection Type:

COM Port (on the PC):

COM2 (on the SF-3040)

Baud Rate: 57600 (keep the default)

Parity: None (keep the default)

Click to connect.
Or

USB (on the PC)

USB-COM1 (on the SF-3040)

Baud Rate: 57600 (keep the default)

Parity: None (keep the default)

Click to connect.
18. Verify that the SF-3050 is connected to the PC: Scrolling messages in the
Communication window indicate that a valid connection is established at the required
baud rate (see Figure 5).