Figure 77: universal power adapter, Figure 78: ac power cord, Figure 79: unterminated power cable without filter – NavCom SF-3050 Rev.I User Manual
Page 86: Figure 77, Figure 79
SF-3050 GNSS Product User Guide
– Rev I
67
Figure 77: Universal Power Adapter
Where MED type approved installations are required, the SF-3050 must be
powered by the supplied AC/DC power adapter, or an approved DC to DC
power converter.
This equipment is required to pass the conducted MED type emission criteria:
Unterminated DC power cable with filter (P/N 94-310274-3010LF); supplied
only with later SF-3050 production units.
Approved DC to DC power converter. The converter isolates the SF-3050
power and chassis grounds.
Contact NavCom Customer Support for more information:
Replacement AC power cords are available through small appliance
retailers (Radio Shack, Walmart, Best Buy, etc.). AC power cords for non-
110VAC locales must be purchased locally.
Figure 78: AC Power Cord
Figure 79: Unterminated Power Cable without Filter
P/N 94-310262-3010LF is supplied with early SF-3050 production units (see Figure 79). It
is a 10ft (3m) unterminated power cable without a filter used to connect directly to a DC
source.
P/N 94-310274-3010LF is supplied with later SF-3050 production units. It is a 10ft (3m)
unterminated power cable with a filter used to connect directly to a DC source.
Both unterminated power cables are fitted with a Positronic socket type (connector:
FR11FP922LM0/AA; pin: FC422N6/AA). The wiring color code and pin assignments
provided below apply to both cables.