NavCom StarUtil-3000 Rev.G - Manual (Page 159)

StarUtil 3000 User Guide – Rev G
10-157
Chapter 10 ............................................................................... Data Logging
This chapter provides instructions to log output data for NCT Proprietary Messages and NMEA
Messages. This data can be used in a number of industry-standard GPS data analysis
programs either in NCT format, after conversion to RINEX format, or by using the NMEA output.

NavCom’s RINEX conversion program, RINEXUtil, is embedded within StarUtil
3000 and supplied on the SF-3040 and the SF-3050 Product Configuration USB
Flash Drives. Refer to Chapter 11 and Related Documents in the fore-matter for
information about the RINEXUtil User Guide.
Refer to these sections for detailed logging instructions:
 Logging Data to a PC/Configure Logging Options : Log the data from scheduled messages
continuously in a single file or in 24-hour data file splits.
 Logging Data to the SF-3050 Internal Memory Device Log the data from scheduled
messages directly to the SF-3050 internal memory.
 Logging to USB Flash Drive via USB Host Cable : Log the data from scheduled messages
directly to a USB flash drive.
Logging Data to a PC
Configure Logging Options
 Click the Data Logging button to open the Configure Logging Options dialog box (see Figure
148).
Figure 148: Configure Logging Options, Logging Configuration