NavCom StarUtil-3000 Rev.G - Manual (Page 61)

StarUtil 3000 User Guide – Rev G
2-59

If this system is used with external Satel radios, the Satel radios must have the
FEC (forward error correction) feature set to Off and ‘Addressing’ must match the
SF-3040 network address.
Figure 53: SF-3040 Radio Configuration and Status
Request Battery Status (SF-3040)

For detailed instructions on charging and installing the SF-3040 battery packs, refer
to the SF-3040 GNSS Receiver Product User Guide, Chapter 6.
Refer to Figure 54 for the steps below: