NavCom StarUtil-3000 Rev.G - Manual (Page 69)

StarUtil 3000 User Guide – Rev G
3-67
5. Select the appropriate unified (SP_UFL) file to upload and click (see Figure 65).
6. The files to be uploaded are displayed on the Ready to Downline Load File dialog box with
the corresponding check boxes selected (see Figure 67). Select and deselect files to upload
as appropriate.
Figure 67: Ready to Downline Load File
7. Click .
8. Once the firmware files are uploaded, the Finished with All Downline Loads dialog box is
displayed (see Figure 68).
9. Click .
10. Check the Firmware Info window (see Figure 57) to view the current versions of all uploaded
firmware.
11. If any file failed to load, go to
12. Upload a Single Firmware File, below.