Grass Valley GV STRATUS v.3.1 - Manual (Page 120)

3. On the Channels tab, click the Show/Hide button to display each K2 system's channels as
desired.
4. Select the working bin for the K2 Summit system as follows:
a) Click the Browse button.
A tree view section opens.
b) Navigate the tree view and create or select the bin.
c) Click
Apply .
The tree view section closes.
The working bin applies to all the channels on the K2 Summit system.
NOTE: The working bin is set for all the channels from the same K2 Summit/SAN system
used in the Channel Panel.
120 GV STRATUS User Manual 2014 02 21
Working with K2 channels