Grass Valley GV STRATUS v.3.1 - Manual (Page 91)

You cannot quick-schedule other events or extend other events to overlap with a channel reservation,
but you are allowed to crash record.
Starting a crash record event
You can crash record when you want to record an event immediately. You can also configure a
default duration for all crash record events in the GV STRATUS Control Panel application.
NOTE: Ensure that you have sufficient storage before proceeding with crash record. If the
remaining storage on the K2 system is less than the default crash duration that was set in the
GV STRATUS Control Panel, the Record button is disabled.
1. Enter the name of the clip in the Name field. If you do not enter a name prior to the crash record,
the application sets a default name with a default suffix. If a clip already exists with the same
name, the application uses the next available default suffix.
2. Select the router source for the recording from the Source drop-down list, if it is available.
3. Select the bin for the clip to be recorded into from the Location drop-down list. If you do not
enter a location prior to the crash record, the clip is recorded into the channel's default bin.
4. Select the Aspect ratio if recording to an SD channel.
5. Click the Record button.
The event cues and begins recording. While recording, the channel and event display red.
6. If you want to change the event duration while recording, right-click on the event and select
Modify Event , or click the Modify Event button. ( M )
Event properties display in the Inspector panel.
You can also double-click the recording event to launch event properties in the Inspector.
7. Enter the new End Time for the event and click Modify .
The crash record event updates to the new end time.
8. If you want to stop the recording at any time, click the Stop button. ( S )
Recording stops and the event status changes to Done.
Locating an event
To locate an event in the Scheduler tool, you can scroll along the timeline and use navigation buttons
on the toolbar.
1. Scroll to the date and time of the event on the timeline if you know the starting date and time of
the recording.
2014 02 21 GV STRATUS User Manual 91
Ingesting assets