Grass Valley GV STRATUS v.3.1 - Manual (Page 215)

3. Select or deselect check boxes on the Views tab to choose Button Panels for your Logging Tool,
or choose logging buttons for your Button Panel.
4. Click Apply to save your changes.
5. Click Revert if you want to undo the change.
6. Click Launch to open the modified Logging Tool or Button Panel.
Modifying logging buttons of the Button Panel
1. Select a logging button that you want to modify on the Button Panel.
2. Do one of the following:
• Right click and select Modify .
• Drag the logging button from the Button Panel and drop it into the Inspector.
The button properties load into the Inspector.
3. Change any properties of the logging button.
4. Click Modify .
The logging button is modified.
NOTE: A button can also be dragged from the button list in the Inspector into the Properties
panel of the Inspector to be modified.
Deleting logging buttons from a Button Panel
1. Right-click on the logging button that you want to delete.
2. Select Delete .
A dialog opens for you to confirm the button deletion.
3. Select one of the following:
• Delete From Panel — Deletes the button only from the active Button Panel.
• Delete from System — Deletes the button from all Button Panels.
The button is deleted according to your choice of deletion.
4. You can also click Cancel if you don't want to delete the logging button.
Pinning logging buttons
You can pin logging buttons to add the pinned marker to other markers during asset logging.
1. Select a logging button that you want to pin in the Button Panel.
2014 02 21 GV STRATUS User Manual 215
Logging assets