Grass Valley GV STRATUS v.3.1 - Manual (Page 145)

The event is divided into two events with identical names.
There is no Undo feature for these operations.
About keyboard shortcuts and input focus in a Channel Panel
A keyboard shortcut takes effect for the channel or gang with the input focus. You must make sure
that the channel or gang that you want to control has the input focus before you use a keyboard
shortcut.
A green border indicates the channel or gang with the input focus. You can give a channel or gang
the input focus as follows:
• To give a gang the input focus, click once anywhere on the gang.
• To give a single (un-ganged) channel the input focus, click once anywhere on the channel.
• To give an individual channel in a gang the input focus, double-click on the channel. This also
displays the overlay transport controls for that channel.
Related Topics
Channel Panel keyboard shortcuts on page 280
Modifying the clip name in a Channel Panel
You can change the name of the clip currently loaded in a channel.
1. Press the Alt key and click on the clip name at the top of the channel.
2. Type in the new name for clip.
The name must conform to asset and bin name limitations.
The name change must not be a change in capitalization only.
3. Press Enter or Tab or click anywhere outside of the clip name to put the change into effect.
Related Topics
Limitations for creating and naming assets and bins on page 298
Loading an asset into the Inspector from a Channel Panel
1. Load an asset into a channel, if not already loaded.
2. Identify the asset type icon on the channel and do one of the following:
• Double-click the icon.
• If the Inspector panel is open, drag the icon to the Inspector.
The asset opens in the Inspector panel.
Using the scrub bar to navigate through a clip
You can use the scrub bar to navigate through clips in ganged channels, single channels, and
individual channels in a gang.
2014 02 21 GV STRATUS User Manual 145
Working with K2 channels