Create a subclip – Grass Valley GV STRATUS v.3.1 User Manual
Page 170
3. To clear a mark-in or mark-out point, click the drop-down arrow by the respective button and
select
Clear Mark In
(
Shift + I
) or
Clear Mark Out
. (
Shift + O
)
4. To navigate to a mark-in or mark-out point, click the drop-down arrow by the respective button
and select
Goto Mark In
(
CTL + I
) or
Goto Mark Out
. (
CTL + O
)
Create a subclip
1. Load an asset into the Viewer.
2. Navigate to the desired starting point using the scrub bar, and click the
Mark In
button.
(
I
)
3. Navigate to the desired end-point using the scrub bar, and click the
Mark Out
button.
(
O
)
Where timecode is displayed you can also right-click the timecode type label and select
Clear
Marks
to clear all current in/out marks.
4. Right-click on the scrub bar and select
Create Subclip
. (
F4
)
The New Subclip dialog box opens.
5. Enter a name for the subclip.
6. Navigate to the location to save the subclip.
7. Click
OK
.
The subclip is created in the specified location. The following is inherited from the parent clip:
•
Rating
•
Tags
•
Description
•
Angle
•
Comments
170
GV STRATUS User Manual
2014 02 21
Editing