Grass Valley GV STRATUS v.3.1 - Manual (Page 137)

4. Use the overlay channel transport to control the channel as desired.
You can stop a play operation and then use the scrub bar to navigate to a location in the clip.
5. Consider the following when controlling an individual channel in a gang:
• Operating the individual channel does not affect the ongoing operation of the gang.
• When you pause and then resume playback on an individual channel, playback starts at the
point it was stopped. The channel does not re-sync with the ongoing playback of the other
channels in the gang.
The individual channel's tally indicator displays the color that indicates its current operational
status.
Locating a loaded clip or playlist
In Channel Panel or Playlist Editor, if you want to quickly access the location of the currently loaded
clip or playlist, the GV STRATUS application can show you the location.
1. Identify the K2 Summit system name and channel name in the lower left section of the channel.
2. Click in the section in one of the following ways:
• Double-click in the section.
• Right-click and select Locate Playlist or Locate Clip .
The GV STRATUS application shows the location as follows:
• In the Navigator panel the bin that contains the clip or playlist is selected.
• The bin's Asset List opens with the clip or playlist selected.
About salvos
A salvo is a pre-defined set of clips to load into the channels of a Channel Panel. You can use a
salvo when you repeatedly set up the same channels to play the same clips as part of your show.
2014 02 21 GV STRATUS User Manual 137
Working with K2 channels