Grass Valley GV STRATUS v.3.1 - Manual (Page 131)

Recording on ChannelFlex channels
When your K2 system channel is configured for ChannelFlex Multi-Cam, two record inputs are
available for the channel.
1. Launch a Channel Panel that contains ChannelFlex channels, or add ChannelFlex channels to
the Channel Panel.
A ChannelFlex Multi-Cam channel appears as follows:
The timecode control, transport controls, and slider bar operate both record inputs at the same
time.
2. Do one of the following record operations:
• Record using crash record.
• Record using new clip.
Record operations are similar to those on a channel that is not configured for ChannelFlex.
A channel configured for ChannelFlex Multi-Cam is a record-only channel so you cannot load assets
into the channel.
Related Topics
Recording on a single channel using crash record on page 125
Recording on a single channel using new clip on page 126
About playing clips in a Channel Panel
You have the following options for playing clips:
• Playback — Plays the clip once and stops at the end of the clip. You can do this on a single
channel, on all the channels in a gang, or on an individual channel in a gang.
2014 02 21 GV STRATUS User Manual 131
Working with K2 channels