Modifying a channel panel while in use – Grass Valley GV STRATUS v.3.1 User Manual
Page 123
Modifying a Channel Panel while in use
After you have launched one or more Channel Panels, you can use drag and drop operations within
a Channel Panel or between Channel Panels to change channels and gangs. You can do this while
channel operations are underway.
1. Click on the top bar of a channel and drag it as follows:
•
To create a gang, drag a single channel on top of another single channel. A gang opens that
contains the two channels.
•
To remove a channel from a gang, drag the channel to a location outside of the gang. The
channel becomes a single channel in the Channel Panel.
•
To remove a channel from the Channel Panel, drag the channel to the
Trash
button
in the
toolbar.
•
To add a single channel to a gang, drag the channel to the gang.
•
To remove a gang, drag all the channels in the gang to a location outside of the gang. When
the last channel is removed from the gang, the gang is removed from the Channel Panel.
2014 02 21
GV STRATUS User Manual
123
Working with K2 channels